Airgas - MIL951204 - Miller® D-74D Dual Wire Feeder Package For .023" - 1/8" Carbon Steel Wire With Bernard® Q400 MIG Gun With 15' Leads And Q4015 Drive Roll Kit

Hover cursor over image to view larger picture

Miller® D-74D Dual Wire Feeder Package For .023" - 1/8" Carbon Steel Wire With Bernard® Q400 MIG Gun With 15' Leads And Q4015 Drive Roll Kit

Airgas Part #:MIL951204

Manufacturer Part #:951204

$NA.NA /NA

Each

Miller® Package D-74D Dual Wire Feeder With High Speed Motor, Bernard® Q400 MIG Gun With 15' Leads And Q4015 Drive Roll Kit

Tool-less rotatable drive assembly allows operator to rotate the drive housing, eliminating severe bends in the wire feed path which reduce gun liner life. Also aids in feeding difficult wires.
Automatic run-in control significantly improves arc starts. Run-in can be independently set on the DX model.
Trigger hold allows operator to make long welds without having to hold the trigger continuously. Reduces operator fatigue.
Standard 10 ft 14-pin interconnecting cord is included.
Posifeed™ - Provides positive wire feeding performance through use of the tool less rotatable drive assembly, calibrated drive roll pressure adjustment arm and 24 VDC high-torque, permanent-magnet motor.

Weight

» 87 lb

Wire Capacity

» 0.078125 in

Wire Speed IPM

» 50 - 780 in/min

Suggested Power Source

» Deltaweld®Series, Dimension™ NT 450, Dimension™ Series, Invision™ Mpa, XMT®Mpa Series, XMT®Series

Input Power

» 10 AMP, 24 VAC, 50/60 Hz

Length

» 35 in

Height

» 14 in

Width

» 21 in

Wire Type

» Carbon Steel

Machine Model

» D-74D

MIG Wire Size

» .023" - 1/8" Carbon Steel

Physical Size

» 14" X 21" X 35"