Airgas - WBU15523 - Weiler® 2 1/2" X 1/2" - 3/8" Copper Center™ Carbon Steel Small Diameter Crimped Wire Wheel Brush For Use On Straight, Drills, Die And Right Angle Die Grinders

Hover cursor over image to view larger picture

Weiler® 2 1/2" X 1/2" - 3/8" Copper Center™ Carbon Steel Small Diameter Crimped Wire Wheel Brush For Use On Straight, Drills, Die And Right Angle Die Grinders

Weiler Corp.

SDS

Airgas Part #:WBU15523

Manufacturer Part #:15523

$NA.NA /NA

Each

Enter multiples of 10 Each

Weiler's standard wheel brushes range from 1" to 15" in diameter. Available fill materials include; heat-treated steel, Type 302 stainless steel, brass, bronze and nickel silver wires and a variety of synthetic and natural fibers. There are two basic forms of wire used in wheel brushes - crimped wire for flexibility and light-duty applications and knot wire for more aggressive brushing action.

Wire brushes clean surfaces in the same manner as sand blasting. Because of using superior quality hardened steel wire rotating at a high rate of speed, the brushes have the ability to separate surface contaminants from base material. Wire brushes will not remove base material or change part dimensions.
Unlike non-woven, bonded and coated abrasives, wire brushes will not load when brushing soft materials or when used to remove paint and similar coatings.
Weiler's solid ring construction ensures that the brush will run smoother and last longer, even in the toughest application situations.

Trim Length

» 0.75 in

RPM

» 20000

Wire Diameter

» 0.014 in

Power Tool Type

» Die Grinders, Drills, Right Angle Die Grinders, Straight Grinders

Wire Type

» Carbon Steel

Brush Type

» Wheel Brush

Diameter

» 2.5 in

Trade Mark

» Copper Center™

Arbor/Stem

» 1/2" - 3/8"

Wire Style

» Crimped Wire